mn101c77a, MN101C77C ram ( 8-bit) rom ( 8-bit) type minimum instruction execution time standard: 0.1 s (at 2.5 v to 3.6 v, 20 mhz)* 0.2 s (at 2.1 v to 3.6 v, 10 mhz)* 0.5 s (at 1.8 v to 3.6 v, 4 mhz)* 62.5 s (at 1.8 v to 3.6 v, 32 khz)* double speed: 0.119 s (at 2.5 v to 3.6 v, 8.39 mhz)* * the operation guarantee range for flash memory built-in type is 3.0 v to 3.6 v. interrupts ? reset watchdog external 0 external 1 external 2 external 3 external 4 timer 0 timer 1 timer 4 timer 5 timer 6 time base serial 0 reception serial 0 transmission serial 1 reception serial 1 transmission serial 3 serial 4 automatic transfer finish a/d conversion finish timer 7 (2 systems) key interrupts (8 lines) timer counter timer counter 0 : 8-bit 1 (square-wave/8-bit pwm output, event count, generation of remote control carrier, pulse width measurement) clock source 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 0 timer counter 1 : 8-bit 1 (square-wave output, event count, synchronous output event) clock source 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 1 timer counter 0, 1 can be cascade-connected. timer counter 4 : 8-bit 1 (square-wave/8-bit pwm output, event count, pulse width measurement, serial 1 baud rate timer) clock source 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; 1/1 of external clock input frequency interrupt source coincidence with compare register 4 timer counter 5 : 8-bit 1 (square-wave/8-bit pwm output, event count, pulse width measurement, serial 0 baud rate timer) clock source 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; 1/1 of external clock input frequency interrupt source coincidence with compare register 5 package lqfp064-p-1414 *lead-free 48 k 2 k MN101C77C (under development) mad00038bem mn101c77a (under planning) 32 k 1.5 k 1
mn101c77a, MN101C77C timer counter (continue) timer counter 6 : 8-bit freerun timer clock source 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of osc oscillation clock frequency; 1/1, 1/4096, 1/8192 of xi oscillation clock frequency interrupt source coincidence with compare register 6 timer counter 7 : 16-bit 1 (square-wave/16-bit pwm output, cycle / duty continuous variable, event count, synchronous output evevt, pulse width measurement, input capture) clock source 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of osc oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency interrupt source coincidence with compare register 7 (2 lines) time base timer (one-minute count setting) clock source 1/1 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency interrupt source 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency watchdog timer interrupt source 1/65536, 1/262144, 1/1048576 of system clock frequency dma controller (automatic data transfer) max. transfer cycles 255 starting factor external request, various types of interrupt, software transfer mode 1-byte transfer, word transfer, burst transfer serial interface serial 0 : synchronous type / uart (full-duplex) 1 clock source 1/2, 1/4 of system clock frequency; pulse output of timer counter 5; 1/2, 1/4, 1/16, 1/64 of osc oscillation clock frequency serial 1 : synchronous type / uart (full-duplex) 1 clock source 1/2, 1/4 of system clock frequency; pulse output of timer counter 4; 1/2, 1/4, 1/16, 1/64 of osc oscillation clock frequency serial 3 : synchronous type/simple i 2 c 1 clock source 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of osc oscillation clock frequency serial 4 : i 2 c slave 1 applicable for i 2 c high-speed transfer mode, 7 bit/10bit address setting, general call special ports buzzer output, remote control carrier signal output, high-current drive port d/a outputs i/o pins 53 common use specified pull-up resistor available input/output selectable (bit unit) i/o see the next page for electrical characteristics, pin assignment and support tool. mad00038bem 8-bit 2-ch. (serves as ad pin, as well) 10-bit 7-ch. (with s/h) a/d inputs 2
pin assignment lqfp064-p-1414 * lead-free nc serves as the vpp pin in the mn101cf77g, and cannot be used as a user pin. mn101c77a MN101C77C electrical characteristics supply current limit symbol condition min typ max unit parameter idd1 fosc = 20 mhz, vdd = 3.3 v , (fs = fosc/2) 6 12 ma idd2 fosc = 8.39 mhz, vdd = 3.3 v, (fs = fosc/2) 3 6 ma idd3 fx = 32.768 khz, vdd = 3.3 v, (fs = fx/2) 40 ma idd4 fx = 32.768 khz, vdd = 3.3 v, ta = 25c 5 10 a idd5 fx = 32.768 khz, vdd = 3.3 v 40 a idd6 vdd = 3.3 v, ta = 25c 0 2 a idd7 vdd = 3.3 v 30 a operating supply current supply current at halt supply current at stop ta = 40 c to +85 c, vdd = 1.8 v to 3.6 v, vss = 0 v 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 an3/pa3 an4/pa4 an5/pa5 an6/pa6 nc (vpp) avdd vdd osc2 osc1 vss xi xo mmod nrst/p27 txd1a/sb01a/p00 sda4a/rxd1a/sbi1a/p01 sbi3/p50 irq4/p24 irq3/p23 irq2/p22 acz/irq1/p21 irq0/p20 tci07/p14 tci04b/p13 tc04a/p12 tci00b/p11 rmout/tc00a/p10 buzzer/p06 sbt0a/p05 rxd0a/sbi0a/p04 txd0a/sb00a/p03 scl4a/sbt1a/p02 p73/sb00b/txd0b p72/sbt1b p71/sbi1b/rxd1b p70/sb01b/txd1b p67/sd07/key7 p66/sd06/key6 p65/sd05/key5 p64/sd04/key4 p63/sd03/key3 p62/sd02/key2 p61/sd01/key1 p60/sd00/key0 p54/scl4b p53/sda4b p52/sbt3/scl3 p51/sb03/sda3 p74/sbi0b/rxd0b p75/sbt0b p76/tci01 p77/tci05 p87/led7 p86/led6 p85/led5 p84/led4 p83/led3 p82/led2 p81/led1 p80/led0 avss pa0/an0/da0 pa1/an1/da1 pa2/an2 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 mad00038bem 3
support tool in-circuit emulator under development flash memory built-in type mn101c77a, MN101C77C mad00038bem type mn101cf77g [es (engineering sample) available] rom ( 8-bit) 128 k ram ( 8-bit) 6 k minimum instruction execution time 0.1 s (at 3.0 v to 3.6 v, 20 mhz) package lqfp064-p-1414 *lead-free 4
if you have any inquiries or questions about this book or our semiconductor prod- ucts, please contact one of our sales offices listed on the back or semiconductor company s sales department. request for your special attention and precautions in using the technical information and semiconductors described in this book (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technologies described in this book and controlled under the "foreign exchange and foreign trade law" is to be export- ed or taken out of japan. (2) the technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. it neither warrants non-infringement of intellectual property right or any other rights owned by our com- pany or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) the products described in this book are intended to be used for standard applica- tions or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. any applications other than the standard applications intended. (5) the products and product specifications described in this book are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the con- sideration of incidence of break down and failure mode, possible to occur to semi- conductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which moisture-proof packaging is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. windows is a registered trademark of microsoft corporation. ms-dos is a registered trademark of microsoft corporation. sun and solaris are registered trademarks of sun microsystems, inc. pc-9801 is a registered trademark of nec. pc/at is a registered trademark of international business machines corporation. tron is an abbreviation of ?he real-time operating system nucleus. itron is an abbreviation of ?ndustrial tron. itron is an abbreviation of ?icro industrial tron. tron, itron, and itron do not refer to any specific product or products. other company names and product names are registered trademarks.
|
